Condor MTS 505 Flying Probe

Our Condor MTS 505 flying probe tester requires no fixture and is therefore ideal not only for traditional production, but also for prototyping and low-volume production.

Thanks to the four movable test heads it offers high adaptation depth and test coverage. The optional use of fixed test pins on the underside of the test object means you can also shorten the test time while increasing the test coverage.

The flying probe test system is equipped with an analog camera, to accurately determine the position of the probe and the position of the device under test (DUT). It is mounted on one of the four test heads and contains optics, as well as lighting. A PC frame grabber card provides digital fiducial and component recognition. The Condor camera can store several images per test (vision test) and also offers the possibility to carry out an autocorrection for the DUT.

Technical Information for stand-alone system

Maximum no. of networks unlimited
Maximum board size (LxWxD) 432 x 508 x 6
Interface Test heads via VG terminal strips,
64-pin
System size (LxWxD) 1550 x 2000 x 1200
Format Fixtureless testing, manual loading
Possible versions none
Maximum fixture pin number 1012


Technical Information for in-line system

Maximum no. of networks unlimited
Maximum board size (LxWxD) 505 x 2000 x 1200
Interface
Test heads and cable pin
System size (LxWxD) 1550 x 2000 x 1200
Format Fixtureless testing, integrated
into production line
Possible versions none
Maximum fixture pin number 1012
Condor MTS505 from Digitaltest