Hyperclean® PX3800 is the only choice for the quality, environmental and cost consciousness electronic manufacturers.

  • Zero lint design. No paper, cellulose or rayon
  • ESD safe - dissipative fabric and core
  • Unique fabric engineered by SMT Express - print more board per cleaning cycle
  • Low solvent use or use without solvent
  • Reduced roll change line stoppage - easy handling
  • Environmentally friendly 100 % polypropylene fabric and core - recyclable

Hyperclean® is available for all major SMT screen printers: DEK, MPM, EKRA, Yamaha, Panasonic, Fuji, Samsung, Minami, Speedprint, SJ Innotech. Custom sizes can be manufactured.


Material 100% polypropylene
Fabric weight 40g/m2
Thickness (unwinded) 0,43 mm
Resistivity < 1010 Ohm (dissipative)
Tribocharging < 15 V
Air permeability > 1700 l/m2/s
Fabrix fixation to core Full length re-usable sticky adhesive
Packaging Individually wrapped in dissipative bag
Manufacturing Developed and manufactured in EU
Hyperclean stencil rolls
Hyperclean stencil rolls

Learn more about stencil cleaning

  • Stencil wiper roll parameters & buzz words

    4 May 2019 15:53
    “Very strong, great cleaning characteristics, high level absorbent and extremely low in lint. “

    Have you heard it before? Almost all stencil wiper roll manufacturer say the same. But are these parameters important and are they backed up by evidence? Let’s have a closer look at SMT stencil roll parameters.
  • Paper or plastic core - that&#39;s the question

    26 August 2018 18:00
    By Pär Gester, SMT Express

    In SMT stencil cleaning roll cores, mainly two different materials, PVC or paper, are used. Other materials, such as polypropylene, are rarer. Here we will review the pros and cons of the different materials. But it's not enough to consider the core as a separate product, we must also look at the whole picture to make the right choice. But let’s start with a review of the different core materials in this article.
  • Is your stencil roll ESD safe?

    30 July 2018 00:00
    By Pär Gester, SMT Express

    An ESD protected area, ESDPA or just EPA, is an area set up in a facility that is protected from the effects of static electricity. Exclusion of static generating material is crucial to maintain an EPA. No object should be brought into the EPA that can tribocharge and discharge rapidly.

    Companies takes this seriously by using ESD safe tools, grounding work surfaces and having staff use special shoes and garment.

    However, there is one strange exception to these precautions; the SMT stencil cleaning roll. 
  • Porosity in stencil cleaning fabrics

    2 April 2017 10:41
    By Pär Gester, SMT Express

    The fabric in SMT stencil cleaning rolls must have a so called high coverage. Otherwise, the fabric will have areas where the density is either to high or to low to perform well. This short article shows why.
  • IPC report - "Evaluation of Under Stencil Cleaning Papers"

    5 March 2015 11:14
    By Pär Gester, SMT Express

    Solder paste screenprinting is known to be one of the most difficult processes to quality assure in Printed Board Assembly (PBA) manufacturing. An important process step in solder paste screenprinting is the under stencil cleaning process and one of the key materials in this process is the cleaning fabric.  This IPC report describes how cleaning fabrics can be tested and it also tells how big differences it can be between different materials.